Carrier TSTATCCPSE01 Manual de instrucciones descargar pdf (Pagina 9)

Sample Wiring Diagram

Calibration

Page 8

24 vac common

24 vac return

fan relay

compressor relay

1st stage heat circuit

2nd stage heat circuit

6 Wire, 1 Stage Cooling, 2 Stage Heat, Heat Pump *

Most residential split and package heat pumps

with auxiliary heat

Thermostat

* The heat pump option must be selected

on during advanced setup.

Every thermostat is calibrated before it leaves the factory.

Under normal circumstances there will never be a need to

recalibrate the thermostat again.

To accommodate special needs, the thermostat may be recalibrated

following these steps:

1. While holding the Mode/Next button in, press the fan button for

5 seconds. After all the icons in the display appear, release

the buttons.

2. Press the Up and Down arrow buttons simultaneously, twice.

3. Press the Up or Down buttons until the flashing number

equals the current room temperature.

4. Press the Mode/Next button to return to normal operation.

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Carrier TSTATCCPSE01 Manual de instrucciones Pagina 9