Carrier 19CB Guía para resolver problemas descargar pdf (Pagina 4)

Part number 20082, Rev 0

INSTALLATION INSTRUCTION

REQUIRED TOOLS – 9/16” socket or wrench, ¾” open end wrench, Phillips head screwdriver,

and level.

UNCRATING –

Move your refrigerator as close to the final location as possible before removing the wooden

skid. The location should be as close as possible to the power outlet, so the extend cord is not

needed.

For all models except ABT-30RC

Remove the lower grill assembly from the front of cabinet.

Skid bolts are located in each of 4 corners inside cabinet bottom. (See photo A). Remove skid

bolts. (See photo B). Carefully lift cabinet off of skid. Replace the lower grill assembly back

onto the refrigerator.

For Swing Door(s) Model (not applicable to ABT-30RC)

Remove door support bracket on interior bottom of the swing glass door and discard (see

Image 1 & 2).

1 2 3 4 5 6 7 8 9 ... 13 14

Sin comentarios

Carrier 19CB Guía para resolver problemas Pagina 4