Carrier 19CB Guía para resolver problemas descargar pdf (Pagina 7)

Part number 20082, Rev 0

SHELF INSTALLATON

Hook shelf clip onto pilaster strips (See below). Position all four shelf clips equal in distance

from the floor for flat shelves. Wire shelves are oriented so that cross support bars are facing

down.

Place shelves on shelf clips making sure all corners are seated properly.

TEMPERATURE CONTROL

NOTE: The controls are preset at the factory to provide the desired air and product

temperatures inside of the units and require no further adjustment. Please contact the

manufacturer’s Technical Support Department before making any adjustment to make sure

the adjustment is necessary and, if so, to ensure it is performed properly.

These models utilize a manual thermostat to control the compressor thereby maintaining

temperature. This thermostat is located on the top right in the interior of the refrigerator.

Turning the thermostat towards the higher numbers will make the unit colder. Lower numbers

make it warmer. Turning the thermostat to the off or 0 position will turn the unit off

INTERIOR LIGHT (not applicable to ABT-30RC)

The interior light is controlled by a rocker switch located on the top right in the interior of the

refrigerator.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Carrier 19CB Guía para resolver problemas Pagina 7