Carrier operating and maintanance Manual del operador descargar pdf (Pagina 34)

Rev. __________

Date _________

2.16

TIE-DOWN STRAPS

Your carrier is supplied with a set of high strength polyester web tie-down

straps. They are to be used to secure wheels of the towed vehicle to the

wheel lift grid. NEVER TOW A VEHICLE WITHOUT THE TIE-DOWN

STRAPS INSTALLED.

The tie-down strap assembly is

comprised of two (2) basic compo-

nents:

1. The strap

2. The ratchet spool mechanism

The following steps should be

followed to properly install the tie-

down straps:

USING THE RATCHET SPOOL MECHANISM

1. First the spool must be set into

“free spool”. This is done by pull-

ing the lock bar out and swing-

ing the handle upward until it

rests in the free spool notch and

then simply pulling out the

amount of strap required to fit

over the tire.

2. Now pull on the lock bar and

move it downward until it en-

gages the ratchet teeth on the

take up spool. By pushing and

pulling the handle up and down,

the strap will be wound onto the

spool.

3. To release the ratchet, simply

pull on the locking bar, disengag-

ing the teeth and raise the

handle to the “free spool” posi-

tion.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Sin comentarios

Carrier operating and maintanance Manual del operador Pagina 34