Carrier 2.4L Manual de usuario descargar pdf (Pagina 52)

Fig. 43: Adjusting Timing Belt Using Tool (VW210)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

7. Tighten lower timing belt cover. Ensure crankshaft is still positioned at TDC No. 1 cylinder, correct if

necessary.

8. Tighten camshaft sprocket securing bolt using Counter-Hold Tool (3036). Observe steel type marking

on bolt head:

Bolts Marked "8.8"

Tighten to 63 ft. lbs. (85 N.m)

Bolts Marked "10.9"

Tighten to 74 ft. lbs. (100 N.m)

9. Take Setting Bar Tool (2065 A) off camshaft. See

Fig. 41

10. Insert Counter-Hold Tool (T10025) and tighten crankshaft vibration damper and timing belt pulley

center bolt. See

Fig. 39

11. Tighten the 4 x M8 crankshaft vibration damper and timing belt pulley securing bolts to 15 ft. lbs. (20

N.m).

12. Install cylinder head cover and timing belt cover.

13. Install power steering pump V belt and adjust. Install generator V belt and adjust. See

DRIVE BELT

ROUTING

14. Install lower sound dampening pan. Install radiator with lock carrier.

Removal (Vehicles From Februar

, 1995)

1996 Volkswagen EuroVan CV

COOLING SYSTEM REMOVAL & INSTALLTION - 2.4L DIESEL

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 61 62

Sin comentarios

Carrier 2.4L Manual de usuario Pagina 52