Carrier 42 HQX Manual de usuario descargar pdf (Pagina 5)

the default value if you use this feature.

The next phase of Setup is Rig Control/PTT and is illustrated in the following graphic.

Please note that you will not see the lower portion of the window shown above upon initial

configuration. The details for HRD (Ham Radio Deluxe) only become visible when support for

HRD has been enabled.

To configure PTT for JT65-HF you will need to have some information ahead of time. Firstly

will you be controlling PTT (TX Keying) via a serial port interface where one of the RS-232

lines drives the PTT line or using VOX (voice activated keying) or PTT via a rig control

method?

If using VOX simply leave the input box for PTT Port set to its default value of NONE.

If using a dedicated serial port interface enter its address as COM# or simply #. COM1 and 1

evaluate as the same. JT65-HF does not offer a listing of available ports or a method to

'search' for the proper port as seen in some programs. In some cases JT65-HF will fail to

work properly with its default serial control routines. If you experience oddities with serial PTT

control try ticking the User Alternate PTT Method check box.

Note: Users running JT65-HF with Wine in either Linux or Mac OS X may find the

1 2 3 4 5 6 7 8 9 10 ... 43 44

Sin comentarios

Carrier 42 HQX Manual de usuario Pagina 5