Carrier RTU OPEN 11-808-427-01 Especificaciones Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Installation
16 RTU Open
J4 Inputs
1 Turn off the RTU Open's power.
2 Connect the input and output wiring to the screw terminals on the RTU Open.
NOTE When utilizing the controller's 24 Vdc auxiliary power out, the total current demand for these two
input channels must not exceed 40 mA (100mA per channel).
NOTE J4 Analog Inputs 1 and 2 may be set for the following device types:
IAQ Sensor
OAQ Sensor
Space RH Sensor
J5 Inputs
The terminals for Inputs 3, 5, and 8 are available for use in place of the flying wire leads at Molex
connectors J1 and J2 identified below:
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Comentarios a estos manuales

Sin comentarios