Carrier Pro-Dialog CONTROL 4 Manual de usuario descargar pdf (Pagina 14)

4.9.18 - OCC1PSX menu

The control provides two timer programs: schedule 1 and

schedule 2 that can be activated.

The ﬁrst timer program (schedule 1) provides a means to

automatically switch the unit from an occupied mode to an

unoccupied mode: the unit is started during occupied periods.

If the auto mode is selected, the second timer program

(schedule 2) provides a means to automatically switch the

active setpoint from an occupied setpoint to an unoccupied

setpoint.

Each schedule consists of eight time periods set by the

operator. These time periods can be ﬂagged to be active or

not on each day of the week plus a holiday period. The day

begins at 00.00 hours and ends at 23.59 hours.

Program is in unoccupied mode unless a schedule time period

is active. If two periods overlap and are both active on the

same day, the occupied mode takes priority over the

unoccupied period.

Each of the eight periods can be displayed and changed

with the aid of a sub-sub-menu. The table on page 17 shows

how to access the period conﬁguration. Method is the same

for the time schedule 1 or the time schedule 2.

Time schedule type:

P6P3

P3P2P2

P4P4P3P2P2

P5P4P4P3P2P2

HOLSUNSATFRITHUWESTUEMON

Time

MON: Monday

TUE: Tuesday

WED: Wednesday

THU: Thursday

FRI: Friday

SAT: Saturday

SUN: Sunday

HOL: Holiday

Occupied

Unoccupied

  

P1: period 1, 0h00, 3h00, Monday

P2: period 2, 7h00, 18h00, Monday + Tuesday

P3: period 3, 7h00, 21h00, Wednesday

P4: period 4, 7h00, 17h00, Thursday + Friday

P5: period 5, 7h00, 12h00, Saturday

P6: period 6, 20h00, 21h00, Holidays

P7: period 7, Not used in this example

P8: period 8, Not used in this example

    

OVR_EXT 0-4 0 hours Occupied schedule override

DOW1 0/1 11111111 - Period 1 day of the week MTWTFSSH