
5-376-000097
REV. 1 - 12/08
Section II: Operation
Page 36
19. Secure the rear of the vehicle.
(See Securing Vehicle
instructions)
20. Once the vehicle is secured from
movement in all directions, lower
the Tilt Control handle and lower
the front of the deck to the
subframe.
21. Lower the Rollback Control
handle and move the deck
completely forward until it
engages the hold downs and into
the transport position.
WARNING:
Always use tie downs at all four corners of the load. Although the
winch wire rope/cable should remain attached to the vehicle and
taut during transport, never rely on the winch and wire rope/cable
to secure the vehicle to the carrier deck.
Comentarios a estos manuales