Carrier operating and maintanance Especificaciones descargar pdf (Pagina 87)

5-376-000097

REV. 1 - 12/08

Section II: Operation

Page 77

TIE-DOWN STRAPS - HYDRAULIC GRID

The hydraulic grid is supplied with a set of high-strength polyester web tie-

down straps. They are to be used to secure the wheels of the towed vehicle

to the wheel grid. NEVER TOW A VEHICLE WITHOUT THE TIE-DOWN

STRAPS INSTALLED.

The tie-down strap assembly is

comprised of 2 basic components:

1. (2) The Strap/Hook Assemblies

2. (2) The Ratchet Spool

Mechanisms

Follow these steps to properly

install the tie-down straps:

USING THE RATCHET SPOOL MECHANISM

1. First set the spool into “free

spool”. This is done by pulling

the lock bar out and swinging the

handle upward until it rests in the

free spool notch and then simply

pulling out the amount of strap

required to fit over the tire.

2. Now pull on the lock bar and move

it downward until it engages the

ratchet teeth on the take-up

spool. By pushing and pulling the

handle up and down, the strap

will be wound onto the spool.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 115 116

Sin comentarios

Carrier operating and maintanance Especificaciones Pagina 87