Carrier operating and maintanance Especificaciones descargar pdf (Pagina 77)

5-376-000097

REV. 1 - 12/08

Section II: Operation

Page 67

4. Extend the lift arm under the

casualty vehicle. Make sure that

all under carriage parts are

cleared and that the front portion

of the grid is in contact with both

tires. Lower the grid fully to the

ground. There is no reason for

the operator to get under the

casualty vehicle.

5. Visually inspect the tire to grid

contact before proceeding.

6. Take the L-Arms and slide them

into the channels on the side of

the grid. Make sure that they

are resting snugly against the

tires, with the L-Arms in close

contact with the tires. Then

reset the locking pin by turning

the "Cam" handle back to the

original position. Be sure that

the pin seats in one of the

holes. The tires are now

confined front and back.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 115 116

Sin comentarios

Carrier operating and maintanance Especificaciones Pagina 77