Carrier operating and maintanance Especificaciones descargar pdf (Pagina 78)

5-376-000097

REV. 1 - 12/08

Section II: Operation

Page 68

"T37" PIVOTING GRID OPERATION

1. Set the grid width as required for

the casualty vehicle to be towed.

2. To set the grid width, loosen the

"T" handles on the front of the

grid arms and pull out. Be sure

both grids are as close to the

center of the boom as possible,

and wide enough to allow the

wheel restraints to fit into their

receivers. Tighten the "T"

handles to secure the grids.

3. Pivot the wheel restraint

receivers on the end of the grid

arms outward by lifting up on the

receiver. Rotate the "Cam"

handles on the receivers 180° to

the open position for easier

placement of the restraint into

the receiver.

"T" HANDLE

WHEEL

RESTRAINT

RECEIVER

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 115 116

Sin comentarios

Carrier operating and maintanance Especificaciones Pagina 78