Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 103)

Chapter 2 103

Test Descriptions

TEST_48 - CPD SMS & Authentication

Each SMS menu item is discussed below:

Execute SMS - when this item is selected, the SMS message in the

User Data field is sent to the phone. The MS Acknowledge message

must be sent to the test set confirming the receipt of the message for

this activity to have a passing result.

Data Mode - this parameter can be set to ASCII or HEX. It indicates

the type of data in the User Data field.

Encoder Mode - available choices are Octet or 7-bit ASCII. Sets the

Encoder Mode for the data in the SMS message.

User Data - If the Data Mode is ASCII this field will accept up to 45

ASCII characters. If the Data Mode is HEX this field will accept up

to 45 hexadecimal characters.

Duplicate User Data - determines the maximum number of copies of

the entered ACSII or HEX data that will be sent in the SMS Data

Burst Message. If a large number of copies are desired, and the

length of the message times the number of copies exceeds the

maximum length of an SMS message, the number of copies will be

reduced until the entire message can be sent in each copy.

Alert- available choices are On or Off. Sets the Alert parameter in

the SMS message.

Priority - available choices are

None/Normal/Interactive/Urgent/Emergency. Sets the Priority

parameter in the SMS message.

Privacy - available choices are None/No

Restrict/Restricted/Confident/Secret. Sets the Privacy parameter in

the SMS message.

Originator Address - This field will accept entries up to eleven digits

long. This sets the originating address for the SMS message and is

required for authentication testing of data burst messages.

Channel Type - available choices are Page or Traffic. This

determines what channel the SMS message will be transmitted on.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 103