Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 189)

Chapter 4 189

Parameter Descriptions

31. RXA Set Audio Lvl [0=no xx=level volts]

This parameter determines whether or not screen prompts are

displayed to help the operator set the volume control during all of the

receiver tests.

To use this parameter, the test operator must have control or have

access to the audio power (volume control) from the MSUT’s transceiver

unit.

Example

If your radio is to be tested at 50% of rated audio power, enter the audio

level in volts, for example 0.2 for 200 mV. The test operator is prompted

to adjust to the correct volume level during testing. (The test system

displays an analog meter. Correct adjustment is made when the meter

needle is set between the two longer lines on the meter.)

The value must be either a 0 for no, or a value for audio level in volts.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 189