
Chapter 3 151
Pass/Fail Limit (Specification) Descriptions
43. TXD Minimum Controlled Output Power (dBm)
43. TXD Minimum Controlled Output Power
(dBm)
This sets the pass/fail limits for the minimum controlled output power.
Only the upper limit is used. The value must be entered in dBm.
Pass/fail limits are determined by using any applicable standard such
as:
• EIA/TIA Standard: Minimum Controlled Output Power
Example
If you desire the minimum controlled output power to be less than −50
dBm, enter
−50 as the upper limit.
Comentarios a estos manuales