Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 64)

64 Chapter 2

S:\agilent\83217\OPT001\BOOK\CHAPTERS\tdscrip.fm

Test Descriptions

TEST_27 - CPA Hook Flash

Description

This test verifies that the correct hook-flash number (3 digits) is

correctly sent by the cellular radio.

The test works as follows:

1. A voice channel is established.

2. The operator is prompted to dial a 3-digit number and press the

SEND key on the MSUT.

3. If the channel is a wide voice channel, the test detects the resulting

signaling tone from the MSUT and sends a “send-called-address”

order to the MSUT on the Forward Voice Channel (FVC). This step

does not occur on narrow voice channels.

4. The test receives the hook-flash number from the MSUT on the

Reverse Voice Channel and displays it. (The number is not compared

to a specific value or number.)

Pass/Fail Limits Used

• None

Parameters Used

• 1. CPA Control Channel [1-799 or 991 -1023]

• 2. CPA DSAT Vector

• 3. CPA Enter Ph# [0=If Needed,1=Always,Here]

• 4. CPA MIN From? [0=RECC,1=All 0’s,2=Phone #]

• 5. CPA Prt RECC RVC Data [0=no 1=yes 2=fail]

• 6. CPA SAT Tone (Hz)

• 22. RX RF Level for Signaling (dBm)

• 49. TXA TS Atten for Signaling [0, 20, 40] (dB)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 64