
Chapter 4 175
Parameter Descriptions
17. RT Nominal Supply Voltage (Vdc)
17. RT Nominal Supply Voltage (Vdc)
This parameter is used to set the mobile unit to its nominal specified
voltage rating under normal conditions. The value must be entered in
Vdc with a range from 0 to 60.
The software requires that an GPIB programmable power supply be
used in order to adjust the voltage to the desired value. See parameter
20. RT Test at Extreme Settings [0=no 1=yes] on page 178 for more
information.
Example
If you desire the power supply voltage to operate the mobile unit at 13.2
Vdc, enter a nominal 13.2 as the value.
Comentarios a estos manuales