Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 60)

60 Chapter 2

S:\agilent\83217\OPT001\BOOK\CHAPTERS\tdscrip.fm

Test Descriptions

TEST_25 - CPA Flow Chart

3. You can perform a page after you register the phone or you have

previously performed an origination and the phone indicates service.

You can page or originate onto an analog voice channel.

• To page an AMPS or NAMPS phone, select the Anl Page field.

• To originate an AMPS or NAMPS phone, dial a number and press

the phone’s SEND key.

4. Once you establish a voice channel, refer to the flow-chart on the

screen and the associated fields to the right of the screen for

operating functions.

Analog functions

• chng chan allows you to change cellular phone channels.

• chng pwr allows you to change cellular phone transmit power.

• clear ls allows you to clear the land station (ls). This terminates

the connection from the land station.

• clear ms allows you to clear the mobile station (ms). This

terminates the connection from the mobile station.

• Quit allows you to exit the test.

• chng sat allows you to change the Supervisory Audio Tone (SAT).

• chng dsat allows you to change the digital supervisory audio tone

(DSAT) for NAMPS phones.

• DTMF allows you to measure the frequency error of the high and low

tones from the DTMF generator in the phone.

• maintence allows you to run a maintenance check of the phone’s

signaling tone frequency and deviation.

• Hook Flsh allows you to transmit a hook flash number from the

phone, receive it, and display it on the test system.

Pass/Fail Limits Used

• None (Since this test only monitors, there are no pass/fail limits

applied to the results.)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 60