
Chapter 4 173
Parameter Descriptions
15. RT High Supply Voltage (Vdc)
15. RT High Supply Voltage (Vdc)
This parameter is used to set the MSUT to its highest specified voltage
ratings. The value must be entered in Vdc with a range from 0 to 60.
Parameter 20. RT Test at Extreme Settings [0=no 1=yes] must be set to
“yes” for parameter 15. RT High Supply Voltage (Vdc) to be activated.
The software requires that an GPIB programmable power supply be
used in order to adjust the voltage to the desired value. See “20. RT Test
at Extreme Settings [0=no 1=yes]” on page 178 for more information.
Example
If you desire the power supply voltage set to operate the MSUT at +20%
of the normal (Nominal) supply voltage, and the Nominal Supply
Voltage is 13.2 V, enter 15.8 as the value.
Comentarios a estos manuales