Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 110)

110 Chapter 3

S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm

Pass/Fail Limit (Specification) Descriptions

2. RXA Audio Response Dev From

−

6 dB/oct R1 (dB)

2. RXA Audio Response Dev From −6 dB/oct R1

(dB)

This sets the pass/fail limits used in TEST_15 - RXA Audio Frequency

Response for the receiver’s audio output circuitry, when its audio

response is tested against the standard 6 dB/octave de-emphasis curve.

The audio response should not deviate beyond the specification limits

over the frequency range of 400 to 2400 Hz. Upper and lower limits

must be entered in dB.

Pass/fail limits are determined by using any applicable standard, such

as:

• EIA/TIA Standard: Voice Audio Frequency Response

Example

If your receivers are normally used with a handset or a line, and the

audio response should not deviate more than +1 to

−3 dB over the

frequency range of 400 to 2400 Hz, enter

−31 as the Lower Limit and as

the Upper Limit.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 110