Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 47)

Chapter 2 47

Test Descriptions

TEST_19 - RXA FVC Order Message Error Rate

Description

This test simulates a Forward Voice Channel (FVC) order message

being sent from a cell site to the cellular radio and measures the Order

Message Error Rate.

The test works as follows:

• A Forward Voice Channel (FVC) audit message is sent 100 times and

the number of acknowledgments from the MSUT is counted.

• The RF level is set by parameter 25. RXA FVC Message Error Rate

RF Level (dBm).

• If the MSUT misses 10 acknowledgments in a row the test

terminates.

FVC order message error rate is expressed in %.

This test is not specified by TIA/EIA standards.

Pass/Fail Limits Used

• 9. RXA Order Message Error Rate (OMER) (%)

Parameters Used

• 1. CPA Control Channel [1-799 or 991 -1023]

• 2. CPA DSAT Vector

• 3. CPA Enter Ph# [0=If Needed,1=Always,Here]

• 4. CPA MIN From? [0=RECC,1=All 0’s,2=Phone #]

• 5. CPA Prt RECC RVC Data [0=no 1=yes 2=fail]

• 6. CPA SAT Tone (Hz)

• 22. RX RF Level for Signaling (dBm)

• 25. RXA FVC Message Error Rate RF Level (dBm)

• 49. TXA TS Atten for Signaling [0, 20, 40] (dB)

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 47