
24 Chapter 2
S:\agilent\83217\OPT001\BOOK\CHAPTERS\tdscrip.fm
Test Descriptions
TEST_06 - TXA Audio Frequency Response
TEST_06 - TXA Audio Frequency Response
Description
This test measures how closely the frequency deviation of the
transmitter follows a 6 dB/octave pre-emphasis slope over a given
frequency range. This test will check the audio response frequencies of
300 Hz to 3 kHz .
NOTE
Audio connections from the radio to the test system are required for this
test.
The test results indicate the flatness of the audio output as frequency is
varied. Audio frequency response is expressed in dB error from the
6 dB/octave pre-emphasis slope.
Background
• Audio frequency response is measured at 2.9 kHz peak deviation for
wide voice channels and 1.5 kHz peak deviation for narrow voice
channels.
• The frequency response measurement is made with the rms detector
and is made with respect to a 1 kHz reference rate.
Pass/Fail Limits Used
• 12. TXA Audio Response Dev from 6 dB/oct (dB)
• 13. TXA Audio Response Roll >2.5 kHz (dB/oct)
Comentarios a estos manuales