Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 152)

152 Chapter 3

S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm

Pass/Fail Limit (Specification) Descriptions

44. TXD Open Loop Output Power @ Ior=

−

104 dBm (dBm)

44. TXD Open Loop Output Power @ Ior=−104

dBm (dBm)

This sets the pass/fail limits for the range of open loop output power.

The upper and lower limit are used. The value must be entered in dBm.

Pass/fail limits are determined by using any applicable standard such

as:

• EIA/TIA Standard: Range of Open Loop Output Power

Example

If you desire the range of open loop output power for I

= −104 dBm to

18 dBm to the maximum allowable ERP for the mobile station class,

then enter 18 as the lower limit and specify “Lower” for the check field.

Any number placed in the upper field will be ignored if check field is set

to “Lower”. If the “Check” field is set to “Lower” then the upper limit

will be set by the maximum RF output power for the class of mobile

station being tested.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 152