Carrier 38TXA Guide Guía de usuario descargar pdf (Pagina 169)

Chapter 4 169

Parameter Descriptions

11. CPD NID Number

This parameter sets the mobile station’s NID (Network ID) number.

The mobile station receives both SID (System ID) and NID numbers

from the Test Set, and compares them with its home SID/NID to

determine if it is roaming. This parameter, as well as CPD SID Number,

do not have to match the mobile station’s programmed values to

operate “home only”.

If the SID and NID values programmed into the mobile station’s NAM

(number assignment module) match the values entered in the

parameters CPD NID Number and CPD SID Number, the mobile

station’s roam indicator will not be lit after the mobile station has

acquired service from the Test Set.

Example

If you want the mobile station to be tested in a non-roaming

environment, enter the NID that is programmed into the mobile

station’s NAM into this parameter. You must also enter the

corresponding SID in the parameter CPD SID Number.

If you want the mobile station to be tested in a non-roaming

environment, enter the NID that is programmed into the mobile

station’s NAM into this parameter. You must also enter the

corresponding SID in the parameter CPD SID Number.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 213 214

Sin comentarios

Carrier 38TXA Guide Guía de usuario Pagina 169