
124 Chapter 3
S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm
Pass/Fail Limit (Specification) Descriptions
16. TXA Current Drain @Levels 0-3 (Amps)
16. TXA Current Drain @Levels 0-3 (Amps)
This sets the pass/fail limits for current consumption used in
transmitter tests at RF output power levels 0-3. Upper and lower limits
must be entered in amps.
Pass/fail limits are determined by using any applicable standard such
as:
• MSUT Specification: Current Consumption, Transmit
Example
If you desire your transmitter’s current consumption to be 3.0 amps
±0.5 amps for RF output power levels 0-3, enter 2.5 as the Lower Limit
and 3.5 as the Upper Limit.
Comentarios a estos manuales