
Chapter 3 113
Pass/Fail Limit (Specification) Descriptions
5. RXA Expandor Tracking Error >0dB (dB)
5. RXA Expandor Tracking Error >0dB (dB)
This sets the pass/fail limits used when the expandor’s output level is
measured at input levels above the 0 dB reference level. The output
voltage tolerance should be within the pass/fail limits. Upper and lower
limits must be entered in dB.
Pass/fail limits are determined by using any applicable standard, such
as:
• EIA/TIA Standard: Expandor
Example
If you desire the output voltage tolerance above the 0 dB reference level
to be
±1 dB, enter −1 as the Lower Limit and 1 as the Upper Limit.
Comentarios a estos manuales