
Chapter 3 119
Pass/Fail Limit (Specification) Descriptions
11. TXA Audio Distortion (%)
11. TXA Audio Distortion (%)
This sets the pass/fail limits used when measuring the audio distortion
that is acceptable in the transmitter. Only the upper limit is used which
must be entered in %.
Pass/fail limits are determined by using any applicable standard such
as:
• EIA/TIA Standard: Modulation Distortion and Noise
Example
If you desire that the transmitter distortion should not exceed 5%, enter
5 as the Upper Limit.
Comentarios a estos manuales