
Chapter 3 147
Pass/Fail Limit (Specification) Descriptions
39. TXA Wideband Data Deviation Transient (kHz)
39. TXA Wideband Data Deviation Transient
(kHz)
This sets the pass/fail limits for the Wideband Data deviation.
Pass/fail limits are determined by using any applicable standard, such
as:
• EIA Standard: Wideband Data
Example
If your standard states that the Wideband Data frequency deviation
should be
±8 kHz with a ±10% tolerance, you would enter 7.2 as the
Lower Limit and 8.8 as the Upper Limit.
Lower and Upper Limits must be entered in kHz.
Comentarios a estos manuales