
Chapter 2 81
Test Descriptions
TEST_36 - TXD Maximum RF Output Power
Pass/Fail Limits Used
The Pass/Fail limits for this test are hard-coded into the software. The
values used were obtained from TIA/EIA IS-98 minimum standard for
the Maximum RF Output Power test.
Parameters Used
• 9. CPD BID Number
• 11. CPD NID Number
• 12. CPD SID Number
• 18. RT Prot Std [0=95 1=95A 2=TSB74 3=ARIB]
• 19. RT Rate Set Selection [0=9600 1=14400]
• 22. RX RF Level for Signaling (dBm)
• 36. TX Units for Pwr Meas [0=dBm 1=Watts]
• 50. TXD Antenna Gain (dB)
Comentarios a estos manuales