
Chapter 3 129
Pass/Fail Limit (Specification) Descriptions
21. TXA Modulation Limiting (kHz)
21. TXA Modulation Limiting (kHz)
This sets the pass/fail limits for the transmitter’s peak frequency
deviation. Only the upper limit is used, which is entered in kHz.
Pass/fail limits are determined by using any applicable standard such
as:
• EIA/TIA Standard: Modulation Deviation Limiting
Example
If the instantaneous peak and steady-state deviations of the
transmitter should not exceed the rated system peak frequency
deviation of
±12 kHz, you would enter 12 as the Upper Limit.
Comentarios a estos manuales