Carrier 38TXA Guide Guía de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 214
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
Chapter 2 59
Test Descriptions
TEST_25 - CPA Flow Chart
TEST_25 - CPA Flow Chart
NOTE
As part of the CPA flow chart test, the test software ordinarily
measures power. However, if the test set is an Agilent 8924E, and the
test set does not include a spectrum analyzer (hardware Option 012),
and parameter 22 is set to YES, the test will perform the rest of the
tests, but not the power measurements.
Description
This test displays a flow-chart representing a cellular phone as it gains
access to a system. It operates with AMPS and NAMPS phones. Once
you have established a voice channel using the flow chart for AMPS and
NAMPS phones, you can test cellular-radio functions including
hand-offs, power level changes, SAT/DSAT changes, hook flashes, and
clear the system. At each stage, reverse-channel data is displayed for
analysis, along with measurements of power, frequency error, and
deviation.
Running the MANUAL test procedure
1. At the beginning of this test, the test system simulates a control
channel. The cellular phone must tune to this control channel and
decode the data stream in order to obtain service. When the phone
succeeds at obtaining service, the NO SERVICE indicator on the
phone will turn-off or the SERVICE light will illuminate. If NO
SERVICE continues, try changing the control channel to the other
band by selecting the Cntl Chan field and entering the appropriate
channel number.
2. When the cellular phone first obtains service, you may originate a
call by dialing a phone number and pressing SEND, or you may
perform a registration by pressing the softkey on the test set
corresponding to register. You must originate a call, or perform a
registration before paging the phone. The origination and
registration provide the phone number of the MSUT to the test set.
To register the phone, select the Register field.
To originate a call from an AMPS or NAMPS phone, dial a phone
number and press the phones SEND.
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 213 214

Comentarios a estos manuales

Sin comentarios