
142 Chapter 3
S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm
Pass/Fail Limit (Specification) Descriptions
34. TXA SAT Deviation (kHz)
34. TXA SAT Deviation (kHz)
This sets the pass/fail limits for the SAT tone’s peak frequency
deviation. Upper and lower limits must be entered in kHz.
Pass/fail limits are determined by using any applicable standard such
as:
• EIA/TIA Standard: Supervisory Audio Tone (SAT)
Example
If you desire that the peak frequency deviation of each transponded
SAT should be 2 kHz
±0.2 kHz, you would enter 1.8 as the Lower Limit
and 2.2 as the Upper Limit.
Comentarios a estos manuales